Everbuild All Purpose Filler Powder 450g

Everbuild All Purpose Filler Powder 450g

ALL PURPOSE POWDER FILLER is a high strength powder filler which is the ideal choice for most indoor repairs. When mixed with water, the filler is ready to apply in one minute and dries in about one hour to a smooth sandable finish. Due to the high levels of added PVA powder, this filler will not shrink or crack and is strong enough to accept nails and screws.

Benefits

• Heavy-duty tough filler – will accept nails or screws when dry.
• Non Shrink.
• Overpaintable with most solvent based and emulsion paints.
• Overstainable.

Areas For Use

Indoor/outdoor repairs to plaster, plasterboard, brick, render, wood, stone and most other building materials. NOTE; Exterior use; always overpaint with oil based primer and top coat to protect filler.

Limitations

• Do not use to fill plastic or metals.
• For holes deeper than 1½ inch, apply in layers and allow to dry before applying second layer.
• Do not add further water once the filler has started to go off. Remix a fresh batch.
• Allow to fully dry before overcoating. 
• Not recommended for overhead repairs. Use ONE STRIKE lightweight filler.
• As the manufacturer cannot know all the uses its products may be put to, it is the users responsibility to determine suitability for use. If in doubt, contact technical Services Dept for advice.

Surface Preparation All surfaces must be clean, dry and free from dust, grease and other contamination. Provide a key to gloss painted surfaces. Cover nail or screw heads with oil based paint and allow to dry. Dampen all porous surfaces to improve adhesion. Application Always use a clean mixing vessel and add 2 parts powder to one part cold water and immediately mix to a smooth paste. The mixed filler will remain workable for 30-40 minutes.

Press the filler into the repair with a spreader or filling knife. Fill the hole proud to allow for sanding and finish with a wet knife. Once dry, sand to a smooth finish. The filler may be papered over, painted or stained when dry. Cleaning: All tools should be cleaned immediately after use with warm water.

Size: 450g

Code: FILL450

Barcode: 5029347600570

Code: 498539

About Everbuild

Everbuild is trusted by professionals and DIYers across the UK for high-performance sealants, adhesives, and fillers that deliver reliable results. Known for quality and innovation, their range supports everything from home fixes to trade-level projects with ease and confidence.

• One of the UK’s most recognised names    
• Designed for long-lasting performance     
• Popular with builders, decorators, and DIY enthusiasts    
• Wide selection available for interior and exterior applications

View more products by Everbuild